Product Description
Our Custom LED Cup Holder Light Kit is an easy car mod that adds some color to your vehicle interior. The subtle glow at night lets you see where you’re placing your drinks, and looks cool too! The LED glow is not overly distracting and in many cars looks stock! Right now we create these LED cup holder lights specifically for a number of vehicles, but have had a huge demand for other types, so we are offering this Custom Kit.
To order all you have to do is measure your car’s cup holder diameter and pick a LED color!
*Please note- since our Custom kits are made to order, there is a 20% restocking fee for returns. If you are unsure of how to measure your cup holders, please contact us!
This custom LED cup holder light kit does not include vehicle specific instructions, so a power source needs to be found to tap the small gauge wiring into and that will depend on the vehicle. Please see notes below for common power locations and sizing instructions. If you don’t want to attempt this install yourself- no problem! Any car audio or car electronics shop should be able to install these custom cup holder inserts for 30-45 minutes of labor depending on the vehicle.
AccentGlowLED products are Made in the USA out of sturdy plastics that will hold up to the drinks in your car and clean easily, and the long life LEDs are rated IP65 Weatherproof so condensation is not an issue!
Tips for vehicle wiring:
An illumination source is best (can usually be found at the radio, vehicle shifter lights, or other locations) and would allow the LED cup holders to turn on and off with your dash lighting. Another common location is to tap into the rear of the power socket if it is a switched power connection (turns on and off with the car). The adhesive tape on this product works best on a flat cup holder bottom so keep that in mind when measuring the diameter of the base. The discs are approximately 5/16″ in height when installed.
We also offer vehicle specific LED cup holder light kits for certain vehicles
Russell –
Great product. I put the blue 3 1/4 ones in my 2019 Grand Caravan. The tricky part was tapping into a wire that dimmed with the other inside lights. I finally figured it out and they look great.
Jonathan S –
These are simple but look great and fit well. The light is not distracting at night and adds a nice touch to the interior. I used the green LED to match the interior gauges of my 04 mustang. Very happy with my purchase.
James Duszynski –
These are fantastic, they look like they came with my 2012 Dodge Ram 1500 Quad cab. Installing them was simple, I would recommend them to anyone looking for a high quality product.
Kenneth Rawls –
What a great product. Purchased these for my 2016 Toyota Tundra and I’m absolutely thrilled with these. Install is about as easy as it gets.
Connor –
Just installed on my 2017 Hyundai Tuscon. No problems with install apart from no detailed walkthrough by AccentGlowLED. Discs look very durable and hoping it will last for a lifetime.
Joe F. –
Got the green set for my Tahoe and they look sweet!
Matt W. –
Ordered for my 2007 Toyota Tundra 2nd gen. Pretty awesome. Finally installed these cupholder LEDs. No more fishing in the dark to put my coffee cup down.
Sizes I ordered with slight gap: (2) 2.75″ (1) 2.5″
If you want them exact, but I cannot confirm: (2) 2 7/8″ (1) 2 5/8″.
Luis Manzano –
Ordered this set for my civic, looks awesome.
josegudino01 –
So first off ima say I have had amazing customer service with them I had to return and Exchange my disks twice since my cupholder was smaller at the bottom than at the top and they were very quick in responding to my questions.
I installed the 2 3/4″ in my 2016 lexus is350 fsport and it was a perfect fit , also if anyone is wondering the size for a 2015 and up camry it’s 2 3/4″ as well.
Kevin Miller –
Purchased for my 2016 Corvette and it adds the perfect amount of lighting without being over the top and ricey. Absolutely recommend
Eric –
Just got the amber set to install in my Nissan Rogue SL 2015. Took me less than 15 minutes to install as I tapped into the wiring of the heated seat button just next to the cup holders. It comes on when I unlock the car and can be dimmed along with the other lights in my car at night. It looks amazing, love it!!! Eventhough it’s a bit lighter in color than the accessory lights in the Nissan Rogue, It look great. I definately recommend those to anyone.
Lecia –
Installed the blue ones in our new 2016 Pruis and they look SWEET! 2 3/4″ was the perfect fit – all our friends love them.
James Sammons –
Got the pink set for my girlfriend, she loves them
Ravi J –
Installed these in my Nissan Altima and I love them!
Paul S –
Purchased the blue kit for my 2012 Camry SE, had them professionally installed with some other upgrades as well. These are absolutely awesome. Beautiful, functional, just awesome. Looks like it came from the factory this way. Such an awesome upgrade! Highly recommended!
Thomas –
These are killer! I put a pair in my 2016 Corvette Stingray and they really add a ton of ambience that was missing from the interior of my ride. Two thumbs up from me!
JWallace –
I installed a set of blue disks on my 2013 Honda Civic. It looks great. The instructions were on point. Excellent job guys! I wish you had instructions for a Miata though.
orangeandbrown –
Installed the cup holder LEDs this morning. It was 92F and I hardly broke a sweat. Instructions were perfect, and the lights look great in my 2012 Elantra. So, I am very happy with the entire process and the product. Highly recommend these to anyone.
Wayne –
Installed these in my 2011 Tahoe and used the 3″ blue disc. I had to hook them up to the head lamp switch harness and install a inline 3 amp fuse to protect the circuit. They look awesome and I can use the dimmer to adjust the brightness. Great product.
Jared –
Got a set for my Jeep Wrangler. Easy install and they look – WOW
david ellard –
just purchased unit for 2015 cambry.final looks great. be sure and seal back side of hole to prevent leaks. also rings are a very very tight fit. but product looks nice after install..
Ron C –
This is a pretty good product, installation is easy and you don’t really feel guilty for drilling holes in your cup holder. The only thing i did not like about the amber discs i ordered was the colour. They were more of a yellow than an amber, and they were pretty dim. My advice would be avoid the colour and probably try one of the other colour options.
dan –
I purchased 6 of these to put in my 2012 Kia Optima. I installed these in the door cup holders in front and back. I also installed these in the rear fold down arm rest cup holder. The LED cup disks are excellent quality, trouble free. They add a awesome ambient lighting in the car as well as allowing you to see where to put your drink at night. The dealership was in awe and asked me where I purchased them. I have also had many, many compliments on them. I tell everyone about accentglowLED!
I just ordered some more for my sons car. It is a Christmas gift! He loves mine. Now he will love his. Gonna be a Father-Son project.
Thanks!!
Carlos G –
Great product and easy install! Love that I found these!!
Leo –
Installed a set of cool white in my 2014 Altima. They look unique and a factory finish.
Randy D Morris –
Ordered the Custom kit with 6 cup holder LED lights. Installed them in my 2011 Ford F250 Super Duty and they look Awesome!!!!! I couldn’t be happier with them. I would most definitely order them again, Thanks so much!!!!
Paul Austin –
Very happy with the blue led cup holders. Only minor thing, had to pay extra postage when it arrived in the UK.
Zach Schneider –
Put these in my 2006 Mitsubishi Eclipse. They fit perfectly and look amazing! Great product, would HIGHLY recommend to anyone looking to add style to their car whether its a sports car or a mini van. Thanks again!!!
Corey –
Purchased the L.E.D lighted cup holder disk last spring and installed them the as soon as they arrived. They were easy to install (great directions) in my 2012 Optima and look FANTASTIC in the vehicle. Thank you AccentGLow for a wonderful product.
Cale –
I bought the LED cup holders about 5-6 months ago and it is definitely worth my money, I love this item and I recommend it to everyone. Quick and easy to install! 🙂
Andrew –
I saw this on eBay and had to buy it for my 2013 Dodge Dart! it fit perfectly in the cup-holder and looks OEM. I always get compliments from everyone about it good job guys!
Marcus –
I have purchased 5 kits for AccentGlowLED and everyone of them was perfect and look fantastic when I installed them. I recommended these kits to anyone. GREAT Products!!!!!!
Ron –
I purchased the lights for my sons 2006 Honda Accord. They work great, look great and really make the interior look sweet. If the next vehicle I purchase does not come with lighted cup holders, it will have a set of these in it before I add anything else.
Joe R –
Purchased the cup holder LED discs for my 2011 Hyundai Sonata. Installation instructions were perfect. Quality is excellent. It has been many months now and they have been trouble free and have proven to be a great value as well as a nice vehicle enhancement. I highly recommend this item.